top of page


Intelligent Control Module with two Full Bridges


The EpeirIO-2HBPL01 is an intelligent control module designed to control electromagnetic devices such as motors or solenoids, support control up to 150W @ 30V.

This combination of features and small size makes the EpeirIO-2HBPL01 suitable for a wide range of applications, and is an easy-to-use solution in application requiring intelligent control.

The Intelligent Motor Control feature doesn’t require any type of encoders to determine the position or the speed of the controlled motor, which reduces the complexity and the cost of the overall system.

The EpeirIO-2HBPL01 is fully configurable with an easy-to-use software which enables the user to configure any application visually.


  • 2 Fully controllable Full Bridges

  • Controls 150W @ 30V devices.

  • Sensor-less Intelligent Motor Control for speed and position

  • 4 configurable analog or digital inputs

  • Multiple modules configuration

  • Intelligent control

  • Software customizable

  • 2 Communication ports to connect options boards: Ethernet, WIFI, Serial…

  • Redundancy option for increased reliability

  • Small footprint : fits exactly on back of NEMA17 Stepper Motor


  • ROHS, CE compliant

  • Wide DC input and control : 10V-30V


  • Intelligent Motor Control

  • LED Lighting Control

  • DC Relay Control

  • DC/DC Converter

EpeirIO Family Features:

  • User friendly interface, graphical data analysis.

  • Reliability toolbox: Redundancy.

  • Scalability toolbox: cascading.

  • Intelligent control toolbox: adaptive control, neural network, fuzzy control, Machine learning.

  • Sequencer toolbox: event table.

  • Temporal functions toolbox: ramp up, ramp down, delay, hysteresis.

  • Math functions toolbox.

  • Digital signal acquisition toolbox: digital filter, FFT.

  • Communication ports toolbox : SPI, RS485, Ethernet, WIFI, USB, Powerline, IOT, parallel port to Raspberry PI, parallel port to Beagle bone, serial port to Raspberry PI, serial port to Beagle bone

  • Inputs toolbox: analog 16bits, analog 24bits, digital.

  • Output toolbox: H-bridge (DC), SSR (AC), phase angle control (AC).

  • Output control toolbox: AC motor, DC motor, stepper motor, servo motor, Current control (DC and AC), voltage control (DC and AC), DAC.

bottom of page