The EpeirIO-TPG01 programmer/debugger tool is a complete programming JTAG tool for Lattice field-programmable gate arrays (FPGAs). The tool can be accessed directly from Lattice Programmer Utility.

The tool provides a UART that can be accessed directly from any Serial Port Utility that can be implemented in the target board for communication or extra debugging purposes.

The EpeirIO-TPG01 programmer/debugger tool uses a 3.3V main supply from USB source cable, all logic signals voltages are 3.3V and bus speed up to 30Mbit/sec. It is up to the user to make sure the signals levels are compatibles with the target board.

The EpeirIO-TPG01 programmer/debugger tool uses a standard Type-A to Type-B USB Cable.

Features/Capabilities:

• Connects to computer via high-speed USB cable.

• Connects to target board via standard 8-pin double row, 100mil pitch connector.

• Programs devices using Lattice Programmer Utility with JTAG Interface.

• Communicates with target board using UART via any Serial Port Utility.

Safety:

• ROHS, CE compliant

• Supports 3.3V target board